Saturday, 3 May 2014

Engineering Drawing Important Questions

Friday, 7 March 2014

My JOURNALS


List of My Contributions Towards Education


1. This is my self published 

http://www.iaeme.com/MasterAdmin/UploadFolder/30120130405029/30120130405029.pdf

http://www.iaeme.com/Journalcureentissue.asp?VType=4&IType=5&JType=IJMET&PageNumber=3

2. This was along with my colleague

http://www.ijert.org/view.php?id=6742&title=analysis-on-reducing-the-induced-drag-using-the-winglet-at-the-wingtip

http://www.ijert.org/browse/volume-2-2013/december-2013-edition

3. This was along with my another colleague

http://theijst.com/december2013/4.ST1312-020.pdf

http://theijst.com/?page_id=553

4. This was along with my 2nd year B.Tech students

http://www.ijrame.com/vol2issue2/vol2issue2.html

http://www.ijrame.com/vol2issue2/V2i211.pdf

5. This was along with my 3rd year B.Tech students

http://www.iaeme.com/MasterAdmin/UploadFolder/30120140502012/30120140502012.pdf

http://www.iaeme.com/Journalcureentissue.asp?VType=5&IType=2&JType=IJMET&PageNumber=2

6. This was along with my 2nd year B.Tech students

http://www.ijrame.com/vol2issue3/vol2issue3.html

http://www.ijrame.com/vol2issue3/V2i338.pdf

Engineering Drawing JNTUH for 2014 Batch


JNTUH Engineering Drawing Practice

The following link is for first unit i.e., conic sections, engineering curves and scales:


The following link is for first unit i.e., Projection of points, lines and planes:

The following link is for first unit i.e., Projection of solids and sections & sectional views:



Sunday, 23 February 2014

Engineering Drawing ppts

The following link will provide you to study engineering drawing basics through presentation which is limited to understand the concepts clearly.
Unit 1: Scales, Conic Sections, Cycloid, Involutes, etc.
Unit 2: Projection of Points, Lines and Planes.
Unit 3: Projection of Solids and Sections.
Unit 4: Development and Intersection of Solids.
Unit 5: Isometric and Perspective Projection.


https://drive.google.com/folderview?id=0Bx7BNvoNSOt0WXpnWUNoNHp6dWc&usp=sharing

Thursday, 12 December 2013

Unit Conversions For Scales in Engineering Drawing

10 millimeters = 1 centimeter
10 centimeters = 1 decimeter
10 decimetres = 1 meter
10 meters      = 1 decameter   
10 decameters = 1 hectometer
10 hectometers = 1 kilometer
1000 meters = 1 kilometer    
1 inch = 2.54cm  
  12 inches   = 1 foot  
   3 feet     = 1 yard    
  22 yards    = 1 chain 
  10 chains   = 1 furlong
   8 furlongs = 1 mile
5280 feet     = 1 mile  
1760 yards    = 1 mile
220 yards    = 1 furlong 


100 sq. mm     = 1 sq. cm
10000 sq. cm     = 1 sq. metre
100 sq. meters = 1 acre
100 acres       = 1 hectare
10000 sq. meters = 1 hectare
100 hectares   = 1 sq. kilometer 
1000000 sq. meters = 1 sq. kilometer
144 sq. inches = 1 square foot
   9 sq. feet   = 1 square yard
4840 sq. yards  = 1 acre
640 acres      = 1 square mile